| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
3.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
6.370 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
9.130 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
4 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.875 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
15.120 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
7.020 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.750 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AGAV |
III END ITEM IDENTIFICATION |
BRADLEY 2350-01-432-1526 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET ASSEMBLY, DISPLAY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM 209, ALLOY 5083-H321 EXCEPT 24,000 PSI MIN YIELD STRENGTH AND 40,000 PSI MIN TENSILE STRENGTH OR ALLOY 5086-H32 OR H-116 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.750 INCHES NOMINAL |
| AHMB |
SECOND LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH |
2.750 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.610 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.750 INCHES NOMINAL |
| CWNC |
SECOND LEG DISTANCE BETWEEN FOURTH AND FIFTH HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
17.650 INCHES NOMINAL |
| CSSZ |
SECOND LEG OFFSET ANGLE |
15.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.750 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHLH |
SECOND LEG END WIDTH |
15.268 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
5 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
17.650 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SLOTS ON LONGER LEG ARE CENTERED CROSSWISE ON LINE 0.380 FROM LEFT EDGE THERE ARE 3 SLOTS OF SAME SIZE CENTERED 1.734 FROM RIGHT EDGE AND 1.257, 3.257 AND 5.257 INCHES FROM OPEN END OF BRACKET ITEMS FURNISHED AS ACCESSORIES: GUSSETS FOR SIDE AND FRONT |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
