| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.2875 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.469 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
1.062 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F18 E/F |
| BYGG |
BLOCK HEIGHT |
0.630 INCHES NOMINAL |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
3.591 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
1.186 INCHES NOMINAL |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
2.311 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
2.311 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.766 INCHES NOMINAL ALL HOLES |
| CWTD |
CLAMPING HOLE QUANTITY |
4 |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AGAV |
| MATT |
MATERIAL |
PLASTIC |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABHP |
OVERALL LENGTH |
4.529 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.575 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| FEAT |
SPECIAL FEATURES |
NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| SUPP |
SUPPLEMENTARY FEATURES |
A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
