| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AIR COMBAT MANEUVERING INSTRUMENTATION (ACMI) P4RC |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.343 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.532 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.125 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.125 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| ASXK |
HOLE QUANTITY |
5 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| ABPX |
MATERIAL THICKNESS |
0.375 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ABTB |
MOUNTING HOLE DIAMETER |
0.164 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERBORED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
6061 ALLOY AND 651 TREATMENT |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.180 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.680 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHLH |
SECOND LEG END WIDTH |
0.250 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.680 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
GUSSET |
| FEAT |
SPECIAL FEATURES |
MOUNTING HOLES ARE 0.164-32UNC-2B COUNTERBORED 0.250 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-QQ-A-250/11 GOVERNMENT SPECIFICATION |
| STYL |
STYLE DESIGNATOR |
TRIANGLE |
