| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
4.000 INCHES NOMINAL |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
18.750 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
1.620 INCHES NOMINAL |
| ADPK |
CORNER HOLE CENTERLINE RADIUS |
0.436 INCHES MINIMUM AND 0.441 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT, ROUND RIB REINFORCED |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
8.700 INCHES NOMINAL AND 23.500 INCHES NOMINAL AND 8.700 INCHES NOMINAL AND 1.500 INCHES NOMINAL AND 2.750 INCHES NOMINAL AND 6.368 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
2.500 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
1.500 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.620 INCHES NOMINAL |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
12 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
5 |
| MATT |
MATERIAL |
STEEL |
| ABRY |
LENGTH |
11.000 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A514/A514M ASSN STD SINGLE MATERIAL RESPONSE |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
78.400 INCHES NOMINAL |
