| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-452-5579 |
| AHPZ |
CENTER SECTION HEIGHT |
2.250 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.060 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.620 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.1 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHQN |
FIRST LEG WIDTH |
2.620 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A663/A663M-1989(R00) NATIONAL SPEC ALL MATERIAL RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.310 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.310 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.1 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
1.500 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.380 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLF |
SECOND LEG WIDTH |
2.620 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
GUARD, MISC-5TH WHEEL RELEASE-VALVE MILL CYT |
| FEAT |
SPECIAL FEATURES |
TWO 0.250 IN MOUNTING HOLES ARE SPACED 1.50 IN APART ON A LINE PARALLEL WITH SLOT WITH CENTERS LOCATED 0.38 INBELOW HORIZONTAL CENTER LINEOF SLOT, AND HOLES CENTERS ARE EACH LOCATED 0.75 IN FROM VERTICAL CENTER LINE OF SLOT |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
