| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
5.966 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.188 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.970 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.250 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
3.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.505 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.188 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
9.630 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
NICKEL ALLOY 625 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-B443, GRADE 1 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
9.630 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.188 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
WELDMENT,BRACKET,CABLE CUTTER |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
