| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
1F-15E-4-4 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.230 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.480 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
PLASTIC |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.230 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
F-15E 8MM REC BRKT |
| FEAT |
SPECIAL FEATURES |
THIS ITEM IS AN INTEGRAL PART OF ASSY WITH AN ADDITIONAL BRACKET ASSY CONSIST OF FACEPLATE FRAME 0.050 IN. THK 6061-T4 PER AMS-QQ-A-250/11 2SCREWS-PN DKN7900-10-A-2 FACEPLATE IS 5.970 IN. POM 0.030 IN. CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES IS 6 |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-PRF-23377H TYPE1,CLASSC MIL SPEC 1ST TREATMENT RESPONSE AND FED-STD-595 FED SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY AND PAINT |
