| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
3.630 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.190 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.380 RADIANS NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.120 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.688 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
1.120 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.880 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.720 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SIDE RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| CSSR |
SECOND LEG ANGLE |
0.380 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.720 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, LOWER, GROUND ROD |
| FEAT |
SPECIAL FEATURES |
RANGE OF MOTION 90 DEGREE LH OR RH STOPPED AND DETAINED |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-O-53022 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-22750 MIL SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER |
