| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.500 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
1.120 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.500 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-080-9088 |
| BYGG |
BLOCK HEIGHT |
0.750 INCHES NOMINAL |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
3.380 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
1.000 INCHES NOMINAL |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
3.120 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
2.000 INCHES NOMINAL |
| AXPE |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES |
5.000 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.406 INCHES NOMINAL FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.406 INCHES NOMINAL THIRD HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
1.032 INCHES NOMINAL FOURTH HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
1.032 INCHES NOMINAL SECOND HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
4 |
| MATT |
MATERIAL |
ALUMINUM |
| ABHP |
OVERALL LENGTH |
6.000 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
1.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLAMP, HALF, TUBING |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
