| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
ILARTS |
| AHQB |
CENTER SECTION THICKNESS |
0.120 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
18.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.18 RADIANS NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.935 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.209 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
14.810 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.935 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
18.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.000 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
3.000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
30.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
1.088 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
18.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PAN/TILT/LENS CONTROL ASSEMBLY BRACKET |
| FEAT |
SPECIAL FEATURES |
LEG ONE HAS 5 HOLES ALL EVENLY SPACED AT 3.625 INCHES APART ALONG SAME CENTER LINE AND ALL HAVING SAME DIAMETER LEG TWO HAS 7 HOLES, 3 WITH 1.188 INCH DIAMETER, AND 4 WITH 0.812 INCH DIAMTER, LARGER DIAMETER HOLES SPACED 2.000 INCHES APART AND SMALL DIAM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
