| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
GENERATOR, ELECTRICAL POWER |
| AHPZ |
CENTER SECTION HEIGHT |
5.500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.390 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
17.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
5.050 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
3 SLOTS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.600 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.390 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.800 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.390 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
LIFTING BRACKET, LEFT |
| FEAT |
SPECIAL FEATURES |
FIRST LEG IS RECTANGULAR WITH 1 NOTCH AND 3 SLOTS CENTER SECTION HAS 90 DEGREE LINES AT ONE END, ANGLES AT OPPOSITE END SECOND LEG IS TRIANGULAR IN SHAPE WITH ONE OFF-CENTER HOLE. |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-53030 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER |
