| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
11.970 INCHES NOMINAL |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.142 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
1025-01-445-0991, 155MM LIGHTWEIGHT HOWITZER, TOWED |
| ADPR |
BODY THICKNESS |
0.142 INCHES NOMINAL |
| CKWB |
CORNER CUT TYPE |
ROUND |
| ADPK |
CORNER HOLE CENTERLINE RADIUS |
0.337 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.030 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.390 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
2.418 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
0.150 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.150 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.152 INCHES NOMINAL |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
3 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
6 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
12.270 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
COVER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| FEAT |
SPECIAL FEATURES |
ADDITIONAL SURFACE TREATMENT IS CHEMICAL CONVERSION COAT PER A4955, CLASS 1 EPOXY PRIMER COATING IS MIL-P-53022, TYPE 2 SHOWN IN DETAIL B ON DRAWING PAINT PRIMED SURFACES PER MIL-C-46168D, GREEN NBR 34094, TINT NBR 383 IAW FED-STD-5958 APPLY PAINT PER MIL |
| ABGL |
WIDTH |
0.250 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PRIMER EPOXY-POLYAMIDE AND PAINT |
