| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.025 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.790 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
RADIAMETER |
| AHQP |
FIRST LEG CORNER RADIUS |
0.130 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.156 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.790 INCHES NOMINAL |
| CSSY |
FIRST LEG OFFSET ANGLE |
40.0 DEGREES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.025 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
301 SPRING TEMPERED STAINLESS STEEL ASSN STD SINGLE MATERIAL RESPONSE |
| AJFQ |
SECOND LEG END RADIUS |
0.130 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.025 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.180 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
RETAINER,PROBE |
| STYL |
STYLE DESIGNATOR |
OFFSET DOUBLE ANGLE |
