| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-447-3892 TRUCK, WRECKER |
| CSSQ |
FIRST LEG ANGLE |
5.0 DEGREES MINIMUM AND 11.0 DEGREES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
1.0 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
42.0 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
10.5 MILLIMETERS MINIMUM AND 11.1 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
49.8 MILLIMETERS MINIMUM AND 50.8 MILLIMETERS MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
19.0 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
125.0 MILLIMETERS MINIMUM AND 129.0 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
55.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
5.0 DEGREES MINIMUM AND 11.0 DEGREES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
1.0 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
49.7 MAJOR MILS AND 50.7 MAJOR CENTIMETERS |
| ADLL |
SECOND LEG LENGTH |
98.0 MILLIMETERS MINIMUM AND 102.0 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
10.5 MILLIMETERS MINIMUM AND 11.1 MILLIMETERS MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
59.5 MILLIMETERS MINIMUM AND 62.5 MILLIMETERS MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, GUIDE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| SFTT |
SURFACE TREATMENT |
PAINT |
