| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.050 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.547 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.800 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.517 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.517 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HINGE,EMERGENCY COVER,TRIM CONTROL PANEL |
| FEAT |
SPECIAL FEATURES |
MAIN SURFACE HAS 2 EACH 0.120 INCH DIAMETER THRU HOLES LOCATED CENTEREDAT 1.300 INCHES APART AND 0.387 INCHESFROM FRONT EDGE LEGS HAVE ONE THRU HOLE EACH OF 0.095 INCH DIAMETER LOCATED 0.145 INCHES FROM BOTTOM EDGE AND 0.093 INCHES FROM REAR EDGE LEGS ALS |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625E,TY II,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
