| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2355-01-568-7688 RG31A2M1 |
| AHQP |
FIRST LEG CORNER RADIUS |
0.100 INCHES NOMINAL |
| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
4.000 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
4.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
3.360 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.690 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ABPX |
MATERIAL THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ABTB |
MOUNTING HOLE DIAMETER |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.780 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.100 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
3.120 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
1.560 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.380 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLH |
SECOND LEG END WIDTH |
4.750 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLF |
SECOND LEG WIDTH |
2.430 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2ND LEG HAS 2 SLOTS THAT ARE OPEN ON BOTTOM EDGE OF BRACKET AND HAS A RECTANGULAR CUTOUT 1.680 IN. WIDE X 1.310 IN. HIGH STARTING AT THE BOTTOM OF LEG AND 1.50 IN. FROM LEFT EDGE OF LEG ALONG WIDTH |
| ABHP |
OVERALL LENGTH |
2.430 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
2.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
DWG: BRACKET, FUSE BOX, (U) |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-5541. CLASS C MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-53022. TYPE OPTIONAL OR MIL-DTL-53030 OR MIL-DTL-53084 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-53039 OR MIL-DTL064159, COLOR NUMBER 33446 (TAN). 2 COATS MIL SPEC 3RD TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER EPOXY AND PLASTIC POLYURETHANE |
