| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-522-1859 TRUCK, DUMP |
| AHPZ |
CENTER SECTION HEIGHT |
126.5 MILLIMETERS MINIMUM AND 128.5 MILLIMETERS MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
8.3 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
607.1 MILLIMETERS MINIMUM AND 612.1 MILLIMETERS MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
9.8 DEGREES MINIMUM AND 11.8 DEGREES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
76.2 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
11.0 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
482.6 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
17.9 MILLIMETERS MINIMUM AND 19.9 MILLIMETERS MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
8.3 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
607.1 MILLIMETERS MINIMUM AND 612.1 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
46.9 MILLIMETERS MINIMUM AND 48.9 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
455.5 MILLIMETERS NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
12.8 MILLIMETERS MINIMUM AND 14.8 MILLIMETERS MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
19.1 MILLIMETERS NOMINAL |
| CSSR |
SECOND LEG ANGLE |
9.8 DEGREES MINIMUM AND 11.8 DEGREES MAXIMUM |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
32.4 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
46.9 MILLIMETERS MINIMUM AND 48.9 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
11.0 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
8.3 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
607.1 MILLIMETERS MINIMUM AND 612.1 MILLIMETERS MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, FRONT, AUXILIARY COOLER |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
