| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
5.0 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
25.4 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
12.4 MILLIMETERS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
9.3 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
4.8 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
50.8 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
41.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A1011/A1011M ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.0 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
12.7 MILLIMETERS NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
5.0 MILLIMETERS NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
25.4 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
41.0 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
14.3 MILLIMETERS NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
6.4 MILLIMETERS NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
4.8 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
50.8 MILLIMETERS NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, MOUNTING, SWITCH, DUMP BED DOWN |
| FEAT |
SPECIAL FEATURES |
SECOND HOLE ON FIRST LEG HAS DIAMETER OF 3.7 MM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
