| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
3MH60SC AIRFRAME HYDRAULIC WINCH ASSY HYDRAULIC HOSE ASSY |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.273 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.606 INCHES MINIMUM AND 0.616 INCHES MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| CWRW |
FIRST LEG SLOT OFFSET ANGLE |
0.0 DEGREES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6350, HARDEN (OIL QUENCH) AND TEMPER TO ROCKWELL C32-38 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.283 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.268 INCHES MINIMUM AND 0.278 INCHES MAXIMUM |
| CWSC |
SECOND LEG SLOT OFFSET ANGLE |
0.0 DEGREES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| ADLL |
SECOND LEG LENGTH |
1.106 INCHES MINIMUM AND 1.116 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
INAVY: BRACKET STD: BRACKET - 90 DEG, AMS 6350, .190 BOLT |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM |
