| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AN/SRC-55(V) FXD CMD RADIO SYS W/2 SPKRS |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.042 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.165 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.240 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.625 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.042 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.165 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.625 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.750 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.437 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
2.625 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.240 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
INAVY: EXTENSION BRACKET DWG: SUPPORT |
| FEAT |
SPECIAL FEATURES |
MATL IS COLD-ROLLED, LOW-CARBON STEEL FIRST LEG HAS 2 CLINCH NUTS (P/N 7483709P10) PRESSED IN FROM FARSIDE AFTER FINISH |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
CARDINAL PAINT NO. 6241-BK59 (BLACK TEXTURE) MFR REF SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT |
