| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.2 RADIANS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.129 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE OR AMS-H-6088 ASSN STD SINGLE MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET ASSEMBLY-CLAMP SUPPORT, OFFSET, LIGHTWEIGHT, CLIP NUT, SLOTTED |
| FEAT |
SPECIAL FEATURES |
SLOT OS .275 WITH .30 R AT EACH END AND DRILLED HOLES .25 AND .129 SEE DWG FOR ADD SPECS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
