| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
ENGINE MOUNT |
| AHPZ |
CENTER SECTION HEIGHT |
195.8 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
8.0 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
50.0 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
45.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
25.0 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
14.0 MILLIMETERS MINIMUM AND 14.5 MILLIMETERS MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
8.0 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
50.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
60.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-46100D (MR) 8 THICK MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
23.8 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
25.0 MILLIMETERS NOMINAL |
| CSSR |
SECOND LEG ANGLE |
45.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
57.1 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
14.0 MILLIMETERS MINIMUM AND 14.5 MILLIMETERS MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
18.0 MILLIMETERS MINIMUM AND 18.5 MILLIMETERS MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPX |
SECOND LEG THICKNESS |
8.0 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
50.0 MILLIMETERS NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SUPPORT, LH ENGINE ARMOR MTG |
| FEAT |
SPECIAL FEATURES |
CONSISTS OF THERMOSTAT HOUSING AND AN O-RING |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
