| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-552-7782 TRUCK, DUMP |
| AHPZ |
CENTER SECTION HEIGHT |
88.9 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
4.8 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
76.2 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
6.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
35.0 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
8.1 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
2.5 MILLIMETERS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
60.0 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
11.2 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
4.8 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
76.2 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
70.6 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36/A36M ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A1008/A1008M ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
22.4 MILLIMETERS MINIMUM AND 28.4 MILLIMETERS MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
44.2 MILLIMETERS MINIMUM AND 46.2 MILLIMETERS MAXIMUM |
| CSSR |
SECOND LEG ANGLE |
6.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
49.8 MILLIMETERS MINIMUM AND 51.8 MILLIMETERS MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
96.8 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
25.4 MILLIMETERS NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
10.2 MILLIMETERS MINIMUM AND 12.2 MILLIMETERS MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
4.8 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
76.2 MILLIMETERS NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, HANGER, TAIL PIPE |
| FEAT |
SPECIAL FEATURES |
CENTER LEG HAS ONE HOLE 10.7-11.7 MIN-MAX MILLIMETERS IN DIA |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
