| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
4930-01-517-6939 TANK UNIT, FUEL DISPENSING, TRUCK MOUNTING |
| AHPZ |
CENTER SECTION HEIGHT |
2.844 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.109 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.688 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.109 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.438 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.656 INCHES NOMINAL |
| CWRW |
FIRST LEG SLOT OFFSET ANGLE |
0.0 DEGREES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.406 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.500 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.563 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.563 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.109 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, HOSE THROUGH TIE-DOWN |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
