| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-432-1526 ARMORED RECONNAISSANCE-AIRBORNE ASSAULT |
| CSSQ |
FIRST LEG ANGLE |
0.4 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.460 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.770 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.630 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
1.000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.460 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B241/B241M ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B308/B308M ASSN STD SINGLE MATERIAL RESPONSE |
| CWNN |
SECOND LEG CUTOUT LENGTH |
0.630 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
0.460 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANGLE STOP, AMMUNITION CONTAINER |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PAINT |
