| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
HOWITZER, 155MM, M777E1 |
| CSSQ |
FIRST LEG ANGLE |
2.8 DEGREES MINIMUM AND 3.4 DEGREES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
2.9 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
37.1 MILLIMETERS MINIMUM AND 39.1 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
9.4 MILLIMETERS MINIMUM AND 11.0 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36/A36M ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
19.1 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
19.1 MAJOR INCHES |
| ADLL |
SECOND LEG LENGTH |
37.1 MILLIMETERS MINIMUM AND 39.1 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AJFS |
SECOND LEG SIDE RADIUS |
2.8 MILLIMETERS MINIMUM AND 3.4 MILLIMETERS MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SIDE RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
6.8 MAJOR MILS AND 7.2 MAJOR CENTIMETERS |
| AHPX |
SECOND LEG THICKNESS |
2.9 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
37.1 MAJOR MILS AND 39.1 MAJOR CENTIMETERS |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLAMP, PLATE, MOUNT |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-16232, TYPE M OR Z, CLASS 3, COLOR GREEN 34094 MIL STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE |
