| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
HOWITZER, 155MM, M777E1 |
| CSSQ |
FIRST LEG ANGLE |
5.4 DEGREES MINIMUM AND 7.4 DEGREES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
5.4 MILLIMETERS MINIMUM AND 7.4 MILLIMETERS MAXIMUM |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
38.0 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
8.2 MAJOR MILS AND 8.8 MAJOR CENTIMETERS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
38.0 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.4 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
12.7 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
4.6 MILLIMETERS MINIMUM AND 4.9 MILLIMETERS MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
62.5 MILLIMETERS MINIMUM AND 64.5 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
75.2 MILLIMETERS MINIMUM AND 77.2 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A693, STAINLESS STEEL TYPE 630 ASSN STD SINGLE MATERIAL RESPONSE OR ASM 5528, STAINLESS STEEL TYPE 17-7 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
69.9 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
31.8 MAJOR INCHES |
| AHLG |
SECOND LEG CORNER RADIUS |
5.4 MILLIMETERS MINIMUM AND 7.4 MILLIMETERS MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
44.5 MAJOR INCHES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
44.5 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
100.6 MILLIMETERS MINIMUM AND 102.6 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
7.6 MAJOR MILS AND 7.7 MAJOR CENTIMETERS |
| AHPX |
SECOND LEG THICKNESS |
4.6 MILLIMETERS MINIMUM AND 4.9 MILLIMETERS MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
62.5 MAJOR MILS AND 64.5 MAJOR CENTIMETERS |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, MOUNTING |
| STYL |
STYLE DESIGNATOR |
ANGLE |
