| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 NOMINAL INCHES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.620 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 NOMINAL INCHES |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.620 NOMINAL INCHES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 NOMINAL INCHES |
| AHLF |
SECOND LEG WIDTH |
0.620 NOMINAL INCHES |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-P-8585 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE AND PRIMER |
