| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
HOWITZER, 155MM, M777E1 |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.625 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.925 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.3 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.451 NOMINAL MILS AND 0.461 NOMINAL CENTIMETERS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.625 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| AJFQ |
SECOND LEG END RADIUS |
0.300 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.3 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.625 NOMINAL INCHES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
LOCK, POSITIVE, DAGR |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
