| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.342 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.031 INCHES MINIMUM AND 1.093 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633, C1020 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 1020 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, CLAMP |
| FEAT |
SPECIAL FEATURES |
INSIDE ANGLE IS 0.062 RADIANS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-Z-325, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ZINC |
