| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
INDEX DRIVE, 1020-00-938-1968 |
| CSSQ |
FIRST LEG ANGLE |
0.250 RADIANS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.269 INCHES MINIMUM AND 0.289 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.208 INCHES MINIMUM AND 1.228 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
57.0 DEGREES MINIMUM AND 63.0 DEGREES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHLH |
SECOND LEG END WIDTH |
0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.653 INCHES MINIMUM AND 0.666 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, SWITCH |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NUK-A-8625 TYPE 2, CLASS 2 (BLACK) MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
