| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
V-22 |
| CSSQ |
FIRST LEG ANGLE |
0.060 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.430 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.020 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
41.000 INCHES MINIMUM AND 41.060 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| MATT |
MATERIAL |
NICKEL ALLOY 625 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.008 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
41.000 INCHES MINIMUM AND 41.060 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANGLE |
| FEAT |
SPECIAL FEATURES |
STYLE DIFFERS FROM ONE CHOSEN IN THAT THERE ARE 35 HOLES INSTEAD OF 1 AND THEY ARE ALL EVENLY SPACED OVER A AREA OF 38.810 TO 38.930 INCHES AND ARE ON THE SAME HORIZONTAL AXIS LEG 2 IS O.O50 INCHES THICK FROM ANGLE OUT 0.700 TO 0.760 INCHES AND THEN BEGIO |
| STYL |
STYLE DESIGNATOR |
ANGLE |
