| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
INTEGRATED FAMILY OF TEST EQUIPMENT (IFTE) |
| CSSQ |
FIRST LEG ANGLE |
0.20 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.875 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.810 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.560 INCHES NOMINAL |
| CSSY |
FIRST LEG OFFSET ANGLE |
30.0 DEGREES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| MATT |
MATERIAL |
STEEL COMP 304 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A666, CONDITION A, NUMBER 2B ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.860 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.250 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.650 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJFQ |
SECOND LEG END RADIUS |
0.750 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.375 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, ANCHOR, TIE DOWN |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
