| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-458-1207 |
| CSSQ |
FIRST LEG ANGLE |
75.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.350 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.312 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.755 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.380 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.000 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
1.000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
5 |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A1011 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
4.960 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.380 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.540 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.100 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, ALTERNATOR |
| STYL |
STYLE DESIGNATOR |
ANGLE |
