| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.16 RADIANS MINIMUM AND 0.22 RADIANS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.326 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.010 INCHES MINIMUM AND 1.070 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| ADLL |
SECOND LEG LENGTH |
5.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, MOUNTING |
| FEAT |
SPECIAL FEATURES |
IN SECOND LEG THERE ARE 9 HOLES AS FOLLOWS, FOUR 0.128 INCH (NOM) THROUGH HOLES ONE 1.190 INCH (NOM) HOLE AND FOUR 0.089 INCH (NOM) THREADED (4-40 NC-2B) HOLES |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
