| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2330-01-508-7887 |
| CSSQ |
FIRST LEG ANGLE |
0.25 RADIANS NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.25 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.78 INCHES MINIMUM AND 0.84 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.282 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.31 INCHES MINIMUM AND 0.43 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.60 INCHES MINIMUM AND 0.66 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.94 INCHES MINIMUM AND 2.06 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
2.19 INCHES MINIMUM AND 2.31 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ASXK |
HOLE QUANTITY |
3 |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36/A36M ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.75 INCHES MINIMUM AND 1.87 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.69 INCHES MINIMUM AND 2.81 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.25 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.94 INCHES MINIMUM AND 4.06 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
2.751 INCHES MINIMUM AND 2.811 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.44 INCHES MINIMUM AND 4.56 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, ABS WARNING LIGHT, LHST |
| FEAT |
SPECIAL FEATURES |
MATERIAL IS HOT ROLLED. HOT DIP GALVANIZE FINISH PER ASTM A123/A123M-02, GRADE 50. FINAL PROTECTIVE FINISH PER 12420325 METHOD 5 OR 4 |
| STYL |
STYLE DESIGNATOR |
ANGLE |
