| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2310-01-595-3986 |
| AHQB |
CENTER SECTION THICKNESS |
0.0747 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.35 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.5294 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.43 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.171 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.42 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.25 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.25 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.35 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.75 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.0747 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.31 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.0747 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.35 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
CENTER HOLE IN THE FIRST LEG IS 0.25 DIAMETER, THE OTHER TWO ARE 0.171 DIAMETER |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
