| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
C130 AMP CMB |
| AHQB |
CENTER SECTION THICKNESS |
0.050 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.800 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.0 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.125 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.800 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.75 INCHES MINIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| ABPX |
MATERIAL THICKNESS |
0.050 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.188 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.125 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.338 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.8755 INCHES MINIMUM |
| AHLF |
SECOND LEG WIDTH |
0.800 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
CHEM FILM GOLD PER UMP-PR-CHE-001 MFR REF SINGLE TREATMENT RESPONSE |
