| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.330 RADIANS MINIMUM AND 0.390 RADIANS MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.565 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.955 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.188 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.260 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL AND RUBBER NEOPRENE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A 514 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A 36 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM D 2000 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
4.415 INCHES MINIMUM AND 4.475 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
4.765 INCHES MINIMUM AND 4.825 INCHES MAXIMUM |
| CWPG |
SECOND LEG CHAMFER ANGLE |
0.970 RADIANS MINIMUM AND 1.030 RADIANS MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
5.900 INCHES MINIMUM AND 5.960 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
4.720 INCHES MINIMUM AND 4.780 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPX |
SECOND LEG THICKNESS |
0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
6.720 INCHES MINIMUM AND 6.780 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
HAS 4 WELDING PADS LOCATED IN DIAMOND FORMATION ON LEG 2 WELDING PADS ARE 1.0 INCHES IN DIAMETER AND 0.63 INCHES IN HEIGHT HAS 2 RUBBER PADS MOUNTED ON TOP AND BOTTOM POSITIONED WELDING PADS OF DIAMOND FORMATION RUBBER PADS ARE 0.75 INCHES IN DIAMETER A |
| STYL |
STYLE DESIGNATOR |
ANGLE |
