| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
FULL TRACKED RECOVERY VEHICLE, 2350-01-390-4683 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.670 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.980 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.125 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
4.603 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
THREADED AND PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A 108, GR 1018-1025 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A 36 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.250 INCHES NOMINAL |
| CSSZ |
SECOND LEG OFFSET ANGLE |
33.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.440 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.375 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, SENSOR, RIGHT, FORWARD |
| FEAT |
SPECIAL FEATURES |
THREADED HOLES ARE ON LEG 1 AND ARE 0.250-28 UNF-2B IN SIZE |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
