| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
SINCGARS V (S |
| CSSQ |
FIRST LEG ANGLE |
0.190 RADIANS NOMINAL |
| CWMX |
FIRST LEG CUTOUT LENGTH |
6.000 INCHES NOMINAL |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
8.500 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
3.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
4 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
12.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.390 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.187 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
16.130 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
6.000 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
1.000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.200 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/B FED SPEC SINGLE MATERIAL RESPONSE AND ASTM B 209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
13.400 INCHES NOMINAL |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
8.250 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
2.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.360 INCHES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
1.000 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
8.500 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
2.750 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
13.400 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
14.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.187 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
16.130 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
THE BRACES (TW0) BETWEEN FIRST AND SECOND LEG ARE 11.630 INCHES (NOM) LONG AND ONE INCH (NOM) WIDE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
