| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
4940016011928 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.52 INCHES MINIMUM AND 0.55 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.60 INCHES MINIMUM AND 0.66 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.97 INCHES MINIMUM AND 1.03 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.22 INCHES MINIMUM AND 0.28 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.97 INCHES MINIMUM AND 2.03 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
2.35 INCHES MINIMUM AND 2.41 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.60 INCHES MINIMUM AND 0.66 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.41 INCHES MINIMUM AND 0.47 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.10 INCHES MINIMUM AND 1.16 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.35 INCHES MINIMUM AND 2.41 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.33 INCHES MINIMUM AND 0.36 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.22 INCHES MINIMUM AND 0.28 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.97 INCHES MINIMUM AND 2.03 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET,ANGLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
