| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
5410-01-592-9463 |
| CBBL |
FEATURES PROVIDED |
NOTCHED SLIDE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
12.50 INCHES NOMINAL |
| CWMR |
FIRST LEG DISTANCE BETWEEN FOURTH AND FIFTH HOLE CENTERS ALONG WIDTH |
5.62 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.195 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
5 SLOTS |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
11.50 INCHES NOMINAL |
| AHRE |
FIRST LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH |
12.00 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.88 INCHES MINIMUM AND 0.92 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.25 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
44.44 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.312 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.38 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
5 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
10.66 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.45 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
23.00 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
44.44 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
6.88 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.90 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.25 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANGLE,RETAINER,INSULATION |
| FEAT |
SPECIAL FEATURES |
COLOR IS SEAFOAM GREEN MARK IAW MIL-STD-130 BY RUBBER STAMP OR STENCIL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
CLEAN,PRETREAT,PRIME AND PAINT IAW 17-3-3208 MFR REF SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER AND PAINT |
