| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.552 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHQN |
FIRST LEG WIDTH |
0.298 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
72.0 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5510 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
72.0 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.298 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
GANG CHANNEL |
| FEAT |
SPECIAL FEATURES |
BOTH LEGS HAVE NOTCHED SLIDES THAT ARE 0.080/0.090 WIDE BY 0.215/0.225 LONG ALONG THE LENGTH CENTER OF BRACKET HAS HOLES TO ACCOMODATE NUTS CENTER TO CENTER NUT HOLE MEASUREMENT IS 2.50 INCHES TO ACCOMDATE 0.2500-28 UNJF-3B NUT |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE AND TWO COATS OF MIL-P-85582,TY I,CLASS C2 PRIMER IAW MIL-F-7179 MIL SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE AND PRIMER |
