| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
6.900 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
4.97 INCHES MINIMUM AND 5.03 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
SPACERADAR |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.97 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
2.22 INCHES MINIMUM AND 2.28 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.50 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.47 INCHES MINIMUM AND 1.53 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.00 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
4.97 INCHES MINIMUM AND 5.03 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
5.75 INCHES MINIMUM AND 5.81 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
3 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE AMS6345B ASSN STD 1ST MATERIAL RESPONSE AND AMS6395F ASSN STD 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 4140 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
3.44 INCHES MINIMUM AND 3.50 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.50 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.75 INCHES MINIMUM AND 5.81 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
2.22 INCHES MINIMUM AND 2.28 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
4.97 INCHES MINIMUM AND 5.03 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, OUTRIGGER ASSEMBLY |
| FEAT |
SPECIAL FEATURES |
SECOND HOLE ON THE FIRST LEG IS SMALLER WITH A 0.1590 INCH DIAMETER, THAT HAS 10-32 UNC-2B THREADING. ASSEMBLY CONSISTS OF: (1) BRACKET, U CHANNEL P/N: A1-44077D-1, (1) WASHER, REINFORCEMENT P/N: A1-44077D-2, (1) PIN ASSEMBLY, LOCATING P/N: 12417258, (1) |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
