| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F-15SA |
| AHPZ |
CENTER SECTION HEIGHT |
4.500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.100 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.520 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
91.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.100 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.520 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.900 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
6 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 COND O FED STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.900 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.312 INCHES MINIMUM AND 0.319 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.100 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.520 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
OPPOSITE -2023 |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
