| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
49.13 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.75 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
15.0 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
44.75 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
15.0 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.50 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.13 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
49.13 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.255 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AGAV |
III END ITEM IDENTIFICATION |
4940-01-619-0916 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
STM B308 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B221 ASSN STD 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
OVER BRACKET |
| ADLL |
SECOND LEG LENGTH |
2.00 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
50.88 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
