| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.06 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
8.00 INCHES MINIMUM AND 8.12 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.94 INCHES MINIMUM AND 1.06 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.19 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.69 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.37 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.50 INCHES MINIMUM AND 6.62 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.69 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| AHPW |
FIRST LEG THICKNESS |
0.06 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
4 |
| AGAV |
III END ITEM IDENTIFICATION |
4910-01-539-6129 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
RIGHT ANGLE PLATE OUTLET |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
3.00 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.00 INCHES MINIMUM AND 1.12 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.32 INCHES MINIMUM AND 0.44 INCHES MAXIMUM |
| CSSR |
SECOND LEG ANGLE |
88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
3.00 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.06 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.14 INCHES MINIMUM AND 0.26 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.75 INCHES MINIMUM AND 0.87 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
8.00 INCHES MINIMUM AND 8.12 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
