| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.27 INCHES MINIMUM AND 0.39 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.50 INCHES MINIMUM AND 0.62 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.25 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.32 INCHES MINIMUM AND 2.44 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.50 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
3 |
| AGAV |
III END ITEM IDENTIFICATION |
4910-01-539-6129 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
SUPPORT ARM PIVOT ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.69 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.19 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.88 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.50 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.19 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.25 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.32 INCHES MINIMUM AND 2.44 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
