| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.06 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.50 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.38 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.25 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.12 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.00 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.00 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AGAV |
III END ITEM IDENTIFICATION |
4940-01-333-8470 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN HOLDER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.38 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.50 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.06 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.28 INCHES MINIMUM AND 0.34 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.00 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.12 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.00 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
